Tag: CGDI Prog

Are you searching the answer about whether CGDI prog BMW can code for 2016 BMW Mini cooper or not? Here share the test report about this car model from CG Company. Hope it helps you!

Preparation:

Car: 2016 BMW Mini Cooper KOMBI

Model: E series R60 (CAS3+ N16)

Device: CGDI Prog BMW key programmer

Test:

Connect CGDI BMW device to the vehicle with OBD wire harness

Open the car ACC button

Enter CGDI software to select “BMW E Series Coding”

Important!

When you use this function, must make sure the network connection well

Wait a moment, and a message will appear with “Current function is trial function”, click “OK”

OBD is connecting…

Reading data…

“Current vehicle FA information is inconsistent. Do you want to code with CAS Fa?”

Click “Yes”

Read data successfully

The vehicle available communication module has been marked black. Please select the appropriate module to set the code

Click “OK”

All the modules of the car have been read successfully

When the meter mileage is adjusted other languages or red dots will be displayed, so we need to code KOMBI to return to normal

Select “KOMBI” -> “Coding”

Click “Yes” when it prompts “Whether to backup data?”

When coding, the meter and the central control will restart automatically

Finally, CGDI BMW key programmer coding KOMBI successfully!

Good luck!

http://blog.obdiitool.co.uk/

The previous article has introduced two ways to read and write N13/N20/N55 ISN by CGDI prog BMW without opening the DME shell. The easier way is to obtain the CGDI BMW authorization. But some customers also don’t know how to use when getting the authorization.

Here share the relevant guide to the CGDI device owners.

The method to read/write N20, N55 and B38 is same as N13, here take N13 as an example.

Preparation:

DME Model: BMW N13

Device: CGDI BMW programmer+ N13 read ISN authorization

One professional OBD cable made by CG Company which is special for reading and writing DME ISN

Procedure:

Follow the wiring diagram in the CGDI BMW software

Connect 12V, CAN-L and CAN-H, GPT-0, GPT-1 and GND cables in order

Supply 12V power to CGDI BMW device, and ensure network connection

Go to CGDI BMW software

Click on “N13/N20/N55/B38 read ISN”

Select “N13” chip and click “OK”

There are 5 options in the main menu: Wiring Diagram, Identify, Read ISN, Write ISN and Back

Click on “Identify”

Read out the chip name, ISN and hardware ID

Click on “Read ISN”

Reading DFLASH…

Read DFLASH and ISN successfully

Copy the ISN

Click on “Write ISN”

Read DFLASH success

Save DFLASH data

Backup data success

Paste the ISN has been read

To distinguish the ISN from the original one

Change the last two digits to “88”, and click on “OK”

Write ISN success

Click on “Read ISN” again

Confirm CGDI Prog BMW key programmer write N13 ISN successfully

Two ways to read N13/N20/N55 ISN without opening the DME shell

Reference:

How to use CGDI BMW to Read N13/N20/N55 ISN without Dismantling DME?

The place to get the CGDI BMW authorization:

http://www.obdiitool.co.uk/wholesale/cgdi-bmw-read-isn-license.html

Thank you!

https://obdiitoolcouk.blogspot.com/

There are two ways to read N13/N20/N55 ISN by CGDI prog BMW no need opening the DME shell.

Method 1: Use professional wiring harness

Method 2: Update CGDI prog BMW authorization

In detail…

Method 1: Use professional wiring harness

In order to test directly, here use the DME removed from BMW car. It’s very easy to use, only need to unplug the port from the car and connect the harness with DME.

The wiring harness cannot be mixed, only used in the corresponding model of DME.

Procedure:

Plug the wiring harness to the corresponding DME type

Then connect to CGDI BMW key programmer via OBD

Power on and keep the voltage stable (about 12V)

Open CGDI BMW software

Read/ Write N20 DME ISN- OK

Read/ Write N13 DME ISN- OK

Read/ Write N55 DME ISN- OK

Method 2: Update CGDI prog BMW authorization

If you don’t have the professional wiring cable, please get the authorization, which is easier to use. Only need 61.99 euro for updating authorization and send your CGDI BMW device serial number to distributor once paid, then you can enjoy the newest CGDI prog BMW MSV80 key programmer feature below:

A0000015   B48 B58 read ISN

A0000017   MSD80 / 81 /85 /87 MSV90 read ISN

A0000018   N13 / N20 / N55 /B38 read ISN

All the DME types above no need to open the shell when read ISN.

Available link to go: http://www.obdiitool.co.uk/wholesale/cgdi-bmw-read-isn-license.html

Hope it helps you!

Source:http://blog.obdiitool.co.uk/cgdi-bmw-read-n13-n20-n55-isn-without-dismantling-dme/