Category: Car ECu Programmer

Godiag GT100 & Autel Ultra test 2005 Ford Expedition ECU

obdiitoolcoukLeave a comment

With Godiag GT100 ECU breakout box connected additionally, you will know if the power voltage is normal and the CAN blue light on the machine will on to tell if Autel maxisys ultra have good communication with the ECU.



1. All tools and adapters on the table:

Godiag GT100 ECU breakout box

Car model & ECU box : 2005 Ford Expedition Limited 5.4L, V8, VIN5, 24v, SOHC, Triton, USA/Canada.



Autel maxisys ultra (contact at email Sales@OBDII365.com if you need)





2. Connections.

Use the OBD 2-in-1 extension cable (in Godiag GT100 package) to connect GT100 and Autel maxisys ultra. 







3. Operation:

1) On Godiag GT100, press the “Power” button, then “12V (30)” & “12V (45)”, you will see it will display the voltage on the machine. It’s great.





2. Next, in the site of my recent purchased vehicle site, searching for PCM, then “Wiring diagram of Electronic Engine Controls -5.4L(25-1)”.




In the power distribution diagram you can see what pins go to.





The connectors have numbers of the pins at the end.





When something is connected incorrectly, no CAN Blue lights are shown.




Then I noticed I was missing a ground.

And still no CAN Blue lights





Then I go through the entire diagram just in case I missed something.

Oh right, don’t forget to connect everything before you continue.

Power sourcing is shorting somewhere, then to connect different power source.


Godiag GT100 and Autel Ultra test 2005 Ford Expedition ECU on bench 18
Godiag GT100 and Autel Ultra test 2005 Ford Expedition ECU on bench 19
Godiag GT100 and Autel Ultra test 2005 Ford Expedition ECU on bench 20

Back to Autel maxisys ultra, tap “Diagnostics” > “EOBD” > “VIN Auto detect”, and I noticed there is still no CAN blue lights on Godiag GT100, during this time I double checked my connectors and realized I need to connect it to the middle connector. And we finally have some communication.

And Autel maxisys ultra decode VIN successfully and read out vehicle information.





I will search for the CKP sensor.

As you can see it is so valuable to have multitasking.





The primary issue was on vehicle the ckp sensor was sensing voltage to both the feed & the return.

With this Bench test I can rule out the issue being the ECU.





All right, I highly recommend Godiag GT100 ECU breakout box, it’s a very good tool.

Video:https://www.youtube.com/embed/D9Csl5fnQYM
Source:http://blog.obdii365.com/2020/10/09/godiag-gt100-and-autel-ultra-test-2005-ford-expedition-ecu-on-bench/

KTM BENCH ECU Programmer Review

obdiitoolcoukLeave a comment

Thanks to @amaflo makes a topic about KTM BENCH Boot feedback at mhhauto. So we can know the real reviews of users.

ominimicu:

I’d say it’s good. Better than clone ktag, no need to open ecu and solder boot!

ANDI1:

Guys, i have on order and will be testing shortly. Mainly for bmw f series so no need to strip ecu apart.

gabi2013:

Try run on windows x86.. 32 bit

I have same error on windows x64

On windows x86.. Work 100%

Bosse:

Received one yesterday.

Working so far, haha.

Trying to find some egpt pinouts.

Tested volvo edc17cp22 and vag cp14 and working.

Some others dont seem to work.

looking for volvo med17 and siemens sid807 gpt.

Bdw. im running on win 7 32bit

raull00:

i do edc17cp20 work very good

bennyboi2005:

Used on edc17c19 no issues

adrianms:

He Died after few test, tested on Mini MEV17.2 OK, BMW EDC17C50 OK, VW EDC17C54 OK, not work on VW EDC17C64.

Bogmar:

I did iveco EDC 17C49 2017 ok boot

jumper SID 208 OK – i know the procedures boot

ducato 17C52 ok

ford SID 208 ok boot

works fast

Tsch325i:

I tested on VW MED 17.5.2 works fine.. BMW EDC17CP41 not work…VW EDC17CP14 not work

Buzzard:

Read Write EDC17CP14 vag ok

Read Write EDC17C46 vag ok

no issues at all, I use professional psu to supply 13.5 v

excellent results so far

pasquale78:

tested on edc17c60 psa – car start few time, then error and car not start (manual solution on other ecu after study patch ktag)

tested on edc17c49 fal – car start few time, then error and car in recovery

tested on edc17cp48 volvo xc60 – not work ecu not found

In summary, KTM Bench is a cost-effective ECU programmer supporting most of ECUs no need disassembling. But please check whether the ECU type you desire is supported from your dealer before purchasing. And don’t connect to Internet and cannot update it when you use, otherwise the device will be locked.

Source:

http://blog.obdiitool.co.uk/ktm-bench-review/

KTM BENCH V1.20 ECU Wiring Diagram 2020 Free Download

obdiitoolcoukLeave a comment

KTM Bench ECU programmer with newest software V1.20 has same function as V1.199. Both of them can read and write ECU by BOOT and Bench. No token limitation, no need to dismantle the ECU, support checksums calculation. The big difference between them is V1.20 KTM Bench adds more ECU wiring diagrams.

1.Free download V1.20 KTM Bench ECU wiring diagram:

Tested link: https://share.weiyun.com/5Jc2V7M

Password: fqxktd

Security: No risk!

Function:

-Latest Jaguar MED17.9.9

-Changes or reads/writes ISN codes (done with other tools) for BMW N20, N55, N63, etc.

-Reads & writes immo data for Bentley MED17.1.1

-Covers VW MED17.5.5, MED17.5.22, MED17.5.25….

-ALL can be done without ECU disassembling good equipment of high quality and with the best technology

2.ECU chip Tuning V1.199 for KTM BENCH win7 free download
https://mega.nz/#!B9oTQahI!HNlNhOuMYmYghLlLyCSECV6GyLbDJLg8wTZrv1J2m10

Important!!!

1.Don’t connect to internet when using V1.199 KTM Bench or V1.20!

2.Don’t update V1.199 KTM bench to V1.20 directly, otherwise the device will be locked!

3.V1.20 software is not compatible with V1.199 KTM BENCH ECU programmer, because V1.20 doesn’t update any ECU and will lock device if update.

Available link to get V1.20 KTM BENCH ECU programmer from China:

http://www.obdiitool.co.uk/wholesale/latest-ktm-bench-ecu-programmer.html

Available link to get V1.199 KTM BENCH ECU programmer from UK:

http://www.obdiitool.co.uk/wholesale/ktm-bench-ecu-programmer.html

  1. V1.20 KTM Bench adds more ECU wiring diagrams:

BOSCH_EDC17CP14_XROM_TC1796_EGPT_VAG

BOSCH_EDC17C47_IROM_TC1782_EGPT_TOYOTA

BOSCH_EDC17C55_IROM_TC1767_EGPT_ALL_BRAND

BOSCH_EDC17CP10_IROM_TC1796_EGPT_MEB

BOSCH_EDC17CP11_XROM_TC1796_EGPT_JAGUAR_LR

BOSCH_EDC17CP19_IROM_TC1766_EGPT_RENAULT

BOSCH_EDC17CP20_IROM_TC1796_EGPT_VAG

BOSCH_EDC17CP27_IROM_TC1796_EGPT_JEEP

BOSCH_EDC17CP42_IROM_TC1797_EGPT_ALL_BRAND

BOSCH_EDC17CP44_IROM_TC1797_EGPT_VAG

BOSCH_EDC17CP46_IROM_TC1797_EGPT_MERCEDES

BOSCH_EDC17CP47_IROM_TC1797_EGPT_OPEL

BOSCH_EDC17CP54_XROM_TC1793_EGPT_VAG

BOSCH_EDC17CP58_IROM_TC1767_EGPT_RENAULT

BOSCH_EDC17CP74_IROM_TC1793_EGPT_VAG

BOSCH_EDC17U01_IROM_TC1766_EGPT_VAG

BOSCH_EDC17U05_XROM_TC1796_EGPT_VAG

BOSCH_M17.8.7_IROM_TC1762_EGPT_POLARIS

BOSCH_M17.8.42_IROM_TC1762_EGPT_KTM

BOSCH_ME17.5.6_IROM_TC1767_EGPT_VAG

BOSCH_ME17.8.5_IROM_TC1762_EGPT_ROTAX

BOSCH_ME17.9.6_IROM_TC1767_EGPT_SUZUKI

BOSCH_ME17.9.11_IROM_TC1762_EGPT_KIA_HYUNDAI

BOSCH_ME17.9.20_IROM_TC1782_EGPT_RENAULT

BOSCH_ME17.9.21_IROM_TC1724_EGPT_DUCATI

BOSCH_ME17.9.21_IROM_TC1724_EGPT_HYUNDAI_KIA

BOSCH_ME17.9.21_IROM_TC1724_EGPT_KTM

BOSCH_ME17.9.23_IROM_TC1724_EGPT_RENAUL

BOSCH_ME17.9.51_IROM_TC1762_EGPT_SUZUKI

BOSCH_ME17.9.52_IROM_TC1782_EGPT_TOYOTA

BOSCH_ME17.9.53_IROM_TC1782_EGPT_TOYOTA

BOSCH_ME17.9.61_IROM_TC1724_EGPT_SUZUKI

BOSCH_ME17.9.64_IROM_TC1724_EGPT_SUZUKI

BOSCH_ME17.9.74_IROM_TC1762_EGPT_POLARIS

BOSCH_MED17.1.1_IROM_TC1796_EGPT_VAG

BOSCH_MED17.1.1_IROM_TC1797_EGPT_VAG

BOSCH_MED17.1.6_IROM_TC1797_EGPT_VAG

BOSCH_MED17.1.10_IROM_TC1793_EGPT_VAG

BOSCH_MED17.1.11_IROM_TC1797_EGPT_PORSCHE

BOSCH_MED17.1.21_IROM_TC1793_EGPT_VAG

BOSCH_MED17.1.27_IROM_TC1793_EGPT_VAG

BOSCH_MED17.1.62_IROM_TC1793_EGPT_VAG

BOSCH_MED17.3.4_IROM_TC1797_EGPT_MASERATI

BOSCH_MED17.3.5_IROM_TC1793_EGPT_FCA

BOSCH_MED17.3_IROM_TC1766_EGPT_FAL

BOSCH_MED17.5.2_IROM_TC1767_EGPT_VAG

BOSCH_MED17.5.5_IROM_TC1766_EGPT_VAG

BOSCH_MED17.5.1_XROM_TC1796_EGPT_VAG

BOSCH_MED17.5.20_IROM_TC1766_EGPT_VAG

BOSCH_MED17.5.21_IROM_TC1782_EGPT_VAG

BOSCH_MED17.7.2_IROM_TC1797_EGPT_MERCEDES

BOSCH_MED17.7.3_IROM_TC1797_EGPT_MERCEDES

BOSCH_MED17.7.5_IROM_TC1793_EGPT_MERCEDES

BOSCH_MED17.8.31_IROM_TC1797_EGPT_ASTONMARTIN

BOSCH_MED17.9.3_IROM_TC1793_EGPT_HONDA

BOSCH_MED17.9.7_IROM_TC1767_EGPT_JAGUAR

BOSCH_MED17.9.9_IROM_TC1793_EGPT_JAGUAR

BOSCH_MEDV172_IROM_TC1766_EGPT_MINI

BOSCH_MEVD17.2_IROM_TC1797_EGPT_BMW

BOSCH_MEVD17.4.4_IROM_TC1793_EGPT_PSA

BOSCH_ME17.8.8_IROM_TC1728_BAIC China

BOSCH_ME17.8.8_IROM_TC1767_MG China

BOSCH_MED17.8.10_IROM_TC1728_GEELY China

CONTINENTAL_EMS2204_2207_2211_IROM_TC1738_FORD

CONTINENTAL_SID208_IROM_TC1797_SSM_PSA

CONTINENTAL_SIM2K_241_IROM_TC1738_HYUANDAI_KIA

CONTINENTAL_SIM2K_241_IROM_TC1767_HYUNDAI_KIA

Source:http://blog.obdiitool.co.uk/ktm-bench-v1-20-ecu-wiring-diagram/

Free Download Xprog Software 6.12 5.84, 5.74, 5.60, 5.55, 5.51, 100% Works

obdiitoolcoukLeave a comment

Free download the newest XPROG V6.12, XPROG 5.84, XPROG 5.74, XPROG 5.60, Xprog 5.55 and XPROG 5.51.

1.XPROG-M 6.12 free download:

Link 1:  https://mega.nz/#!625RxAqJ!Y7IInI5ZhG3titLMPnFOvALbOa2RHIp7ENG2o4PIzag

Password: No need

Link 2: https://share.weiyun.com/5m5Vkw0

Password: fxo5qz

Xprog 6.12

XPROG V6.12 installation video:

XPROG-M V6.12 Using tips and installation guide:

How to use and install XPROG V6.12 on Win XP/ Win7/Win8?

2.XPROG V5.84 free download:

https://mega.nz/#!7vpDwQ4D!MrdDW0tVf-6-wXtGKqpUmj7CA2HFlFlMf5AeNvYgRbI

Tips for installing Xprog V5.84.

1.Disable anti-virus program when downloading software and running software.

2.Uninstall all the software and USB drivers of the old version xprog-box on your computer, then install the new XPROG5.84 software.

  1. Run 5.84Regsisty program for several timeswhen installing software

4.Run  5.84Regsisty file for 2 times before you run software everytime .

3.XPROG V5.74 free download:

XPROG- BOX 5.74cnen.zip: https://share.weiyun.com/5dvdm7t

Password: bt3ron

Confirmed can work 100%

4.Xprog 5.60 download on Mega:

https://mega.nz/#F!Y91UQKqS

Pass: go to http://mhhauto.com/Thread-in-a-need-to-Xprog-5-6-XProgDesktop for passwords

5.Xprog 5.55 software download:

https://mega.nz/#!1FY3gSrR

Pass:!qT39OiwNKIW9t1dnwXEY3HhoGMR7h3uebwg2-USEe8Y

6.Xprog 5.51 download:

https://mega.nz/#!9HRy1ThC!T3no6RRU8-LOGq2U7penvHtwMlwliPR8VoBQoHf9j58

Source:http://blog.obdiitool.co.uk/free-download-xprog-6-12-5-84-5-74-5-60-5-55-5-51/

CGDI DME DDE ECU Connecting Board

obdiitoolcoukLeave a comment

CGDI DME-DDE CG-ECU simulator is a power cable, not only can do ECU test,also with ECU programming function.

It’s very easy-to-use:

OBD connection equipment
Connect to 12V power supply
The model port is connected to the corresponding ECU module
Push the palm of the plug, pull it back and push it back

Cgdi DME 4

CG-ECU simulator Function:
（1）ECU test
（2）ECU programming
（3）ECU clear
（4）ECU refurbishment
（5）ECU replacement

Support DME-DDE models

MEV9N46(N46)
ME9.7 (272)
MED17.7.X
SIM4LKE
SIM266
DE2.0 SIM271
KE2.0 SIM271
D62M57 (MSV80,MSD80)
CR3.XX
CR4.XX
CR5
CR6/CR60.XX
CRD.11
CRD.2XX

Cgdi DME 8

Video demo : How to use CGDI DME-DDE Cable:
CGDI MB Read SIM4LKE ECU with DME DDE cable No soldering

Preparation:

CGDI prog MB key programmer
ECU connecting board DME cable
Mercedes-Benz ECU

Laptop or Desktop

http://blog.obdiitool.co.uk/

How to Solve CGDI BMW V3.1.0 “Software Signature Error”

obdiitoolcoukLeave a comment

A customer got trouble in CGDI BMW key programmer update, here is the problem:

I downloaded the newest CGDI prog BMW V3.1.0 from the official website, and I already installed it for my device, but when I wanted to login, a message prompted “Software signature error, please update”. I tried to update, it showed “this is the newest version, needn’t to upgrade”.

Cgdi Bmw V3.1.0 Software Signature Error 1
Cgdi Bmw V3.1.0 Software Signature Error 2
Cgdi Bmw V3.1.0 Software Signature Error 3

Solution from obdiitool.co.uk engineer:

Please uninstall the software and download by the following link.

CGDI_V3.1.0_Build_200103.7z: http://lixian.b.qq.com/AfqHFwHS02Q

Password: 8XVJ

Note: this download link is valid for 7 days, if you cannot download, please contact our customer service.

Tech support: www.obdiitool.co.uk

 Source:http://blog.obdiitool.co.uk/how-to-solve-cgdi-bmw-v3-1-0-software-signature-error/

KTMflash Reprogram VW Magotan TC1766 MICRO

obdiitoolcoukLeave a comment

Question: Is it possible to use KTM Flash ECU programmer to read VW Magotan data according to the chip model?

Answer: Yes. KTMflash ECU programmer with gearbox power upgrade tool can read chip data, read & write ECU data, read transmission data, etc at a high speed.

Question: How to reprogram?

Answer: It’s easy to use, just follow the following steps:

Step 1: Connect KTMFlash ECU programmer, gearbox power upgrade tool, VW Magvotan ECU and computer well

Step 2: Open software, select the corresponding ECU to enter reprogramming mode

Ktmflash Reprogram Magotan Tc1766 Micro 01

Step 3: When read data successfully, just save it

Ktmflash Reprogram Magotan Tc1766 Micro 02
Ktmflash Reprogram Magotan Tc1766 Micro 3

Question: Besides TC1762/TC1766 MICRO (1504KB), which Infineon chip models can read the BOOT mode by KTMflash ECU Programmer?

Answer: Look at the chip models list below:

Infineon: TC1762/TC1766 EEPROM (32KB)

Infineon: TC1792/TC1796 MICRO (2048KB)

Infineon: TC1796 MICRO+EXT (4096KB/6144KB)

Infineon: TC1796 EXT (2048KB/4096KB)

Infineon: TC1796 EEPROM (128KB)

Infineon: TC1792 EEPROM (64KB)

Infineon: TC1738/TC1767 MICRO (2048KB)

Infineon: TC1738/TC1767 EEPROM (64KB)

Infineon: TC1797 MICRO (4096KB)

Infineon: TC1797 MICRO+EXT (6144KB/8192KB)

Infineon: TC1797 EXT (2048KB/4096KB)

Infineon: TC1797 EEPROM (64KB)

Infineon: TC1724/TC1728 MICRO (1536KB)

Infineon: TC1724/TC1728 EEPROM (64KB)

Infineon: TC1782/TC1784 MICRO (2560KB)

Infineon: TC1782/TC1784 EEPROM (128KB)

Infineon: TC1793/TC1798 MICRO (4096KB)

Infineon: TC1793/TC1798 MICRO+EXT (6144KB/8192KB)

Infineon: TC1793/TC1798 EXT (2048KB/4096KB)

Infineon: TC1793/TC1798 EEPROM (192KB)

Tech support: http://www.obdiitool.co.uk/wholesale/latest-ktm-flash-ecu-programmer.html

Source:http://blog.obdiitool.co.uk/ktmflash-reprogram-vw-magotan-tc1766-micro/

SVCI 2018 Error “Device Not Opened” Solution

obdiitoolcoukLeave a comment
Fvdi Svci 2018 Device Not Opened 1

When you use FVDI 2015, FVDI 2018, FVDI 2 OBD terminator or TM100 Transponder key programmer, if a message appears “Device not opened” error, how to do?

Solution:

Don’t worry! It is easy to solve.

There are main causes for “Device not open” error:

1.USB driver problem

2.Connection problem

Please operate follow the steps below:

Step 1: Check the connection with device and computer

Step 2: Check the USB driver version whether is V2.10.0

Then install FVDI USB driver again!

FVDI Driver free download link: http://www.fvdiobd.com/download/FVDI_DRIVER.zip

Or Mega link: https://mega.nz/#!7Th0BShR!wmBcqnbEjPiSVBqCIa6tND6YrW60waLrymAsrTsxGWw

For your information, here is the video to solve SVCI 2018 “Device Not Opened” error clearly:

Source:http://www.obdiitool.co.uk/service/how-to-solve-svci-2018-device-not-opened.html

Xprog m 5.84 Auto ECU Programmer Full Chips List

obdiitoolcoukLeave a comment

As we know, XPROG-M V5.84 with USB Dongle is available with reading EEPROM. Here have collected the latest and most complete chips list supported by this XPROG ECU programmer.

1.XPROG V5.84 Serial EEPROM List:

Incl. Atmel, Catalyst, Fairchild, Microchip, Mitsubishi, National, ST, Toshiba and Xicor

Atmel

AT24C01A

AT24C02

AT24C04

AT24C08

AT24C16

AT24C32

AT24C32A

AT24C64

AT24C64A

AT25010

AT25020

AT25040

AT25080

AT25160

AT25320

AT25640

AT25128

AT25256

AT93C46

AT93C46A

AT93C56

AT93C56A

AT93C57

AT93C66

AT93C66A

    Catalyst

CAT24(W)C02

CAT24(W)C04

CAT24(W)CO8

CAT24(W)C16

CAT24(W)C32

CAT24(W)C64

CAT93C46

CAT93C46A

CAT93C56

CAT93C56A

CAT93C57

CAT93C66

CAT93C66A

CAT93C86

CAT93C86A

…

  2.XPROG V5.84 MCU/MPU List:

Atmel

ATmega8

ATmega16

ATmega32

ATmega64

ATmega128

    Neon (XC16x)

SA-KXC164C9-16F

SA-KXC164CS-32F

    Neon (XC20xx)

SAH-XC2060M-104 flash0

SAH-XC2060M-104 flash1

SAH-XC2060M-104 flash2

SAH-XC2060M-104 flash3

SAK-XC2060N-40 flash0

SAK-XC2060N-40 flash1

…   

  1. XPROG V5.84 Dashboards List:

Audi

AUDI A3 2007

AUDI TT 2008

BMW

E38-M35080

E39-M35080

E46-M35080

E46-M35080-BOSCH

E53-M35080

E65-M35080

X3-E83-M35080

…

4.XPROG V5.84 Immobilizers List:

BMW

EWS 3

EWS 3/2D47J/

CAS4 1N35H 5M48H man.date from 1030 v2

INC5H_ 5M48H_ D-FLASH_ BACKUP_ v2

1N35H_ 5M48H_ P-FLASH_ BACKUP_ v2

1N35H__5M48H_ D-FLASH_ v2

1N35H_ 5M48H_ P-FLASH_ v2

MC9S12C64-FLASH

…

5.XPROG V5.84 ZGS 001 List:

A 164 540 56 62

MC9S12DT256>EEPROM

MC9S12DT256-FLASH

MC9S12DT256- External FLASH(Am29F400BT)

A 169 540 69 45

MC9S12DT256>EEPROM

MC9S12DT256-FLASH

MC9S12DT256- External FLASH(Am29F800BT)

…

6.XPROG V5.84 TV List:

BMW

E60 E63 E64

7.XPROG V5.84 Other ECU List:

Audi

BCM2_ uPD70F3381 Code Flash

BCM2_ uPD70F381_ Data_ Flash

BMW

FRM EEE

…

8.XPROG V5.84 Airbag [MAC7xxx] List:

BMW F Series

Flash

Shadow

FORD 9E53-14B321-BK

Flash

Shadow

…

9.XPROG V5.84 Airbag [XC2xxx] List:

AL34-14B321 –FA (XC2361A-56)

AL34-14B321-FA flash0

AL34-14B321 FA flash1

AL34-14B321-FA flash3

BJ32-14D374-AC(XC2361A-56)

BJ32-14D374-AC flash0

BJ32-14D374-AC flash1

BJ32-14D374-AC flash3

…

10.XPROG V5.84 [SPC56xxx/MPC560x] List:

Honda_ Acord (SPC564P54L3)

SPC564P54Lx DATA flash

SPC5604P54Lx_ CODEL flash

Honda_ CR-V(SPC560P50L3)

Code Flash

Data_ Flash

…

11.XPROG V5.84 Airbag [Renesas] List:

Peugeot Citroen (D70F3524)

PD70F3624_ Code Flash(SPI)

PD70F3624_ Data Flash[SPI]

Opel Mokka 2016 (D70F3548)

PD70F3548/49/50 Data Flash

PD70F3548_ Code_ Flash

That’s a partial chips list above, check the full list click here

Source:

V5.84 XPROG-Box ECU Programmer Full Chips List

IProg + Pro V80 Free Download, Installation on Win7/8/XP/Vista

obdiitoolcoukLeave a comment

Obdiitool.co.uk has released the newest iProg ECU programmer-V80. It’s available with English & Russian. Free download iprog+ Pro V80 and install on Win7, Win8, Win XP or Vista.

添加图片说明

Part 1: Free download V80 iProg Pro

Free download link:https://share.weiyun.com/5TDLgT0

password: sppubu

Part 2: How to installIProg+ Pro V80

The guide to install V80 iProg Pro software is same asiprog+prog V77:

iProg+ Pro V77 Free Download, Installation on Win7

Installation instructions:

1.Create a new folder in any convenient place on the disk. For example [iProgProSoftware]

2.Unpack the archive into the created folder

3.Run the program

4.Select the menu item Help -> Check for Updates.  Then follow instructions

5.Copy into your Scrips and Calculators folders your scripts and calculators, respectively

Part 3: What canV80iProg+ Pro do

1.The newest ECU programmer iprog Pro V80 is designed to work with automotive microelectronics:

Work with odometers on OBDII connector

Work with odometers on the table through adapters

Work with multimedia unlocking the tape recorder

Work with keys (IMMO, Transponders), copying, preparation, unlocking

Work with IMMO-Key Auto dumps

Work with the airbag computer, deleting crash data

Transfer readings from miles to km

Read and write processors and its used in cars

Remove the particulate filter in the dump

Work with keys to the intercom

Realign Pin cod from dump (some brands)

Control board number, + scripts full Base number. Ability to update!

2.The functions of the V80 Iprog+ iprog pro key programmer are tested for performance.

Functions: airbag, dashboard, car radio, ecu, eeprom, immo, mcu and special functions

Check the functions has been tested, click here: http://www.obdiitool.co.uk/wholesale/iprog-prog-odometer-airbag-reset-tool.html

That’s all!

Source:http://blog.obdiitool.co.uk/iprog-pro-v80-free-download-installation/