What advanced features LAUNCH X431 V+ HD3 module has that HD-II module has no?
Good to know
HD-II module: compatible with X431 V+, X431 PRO3, X431 PADII etc, only available for Commercial Vehicles.
LAUNCH HD-III module : compatible with X431 V+, pad3, pro3 etc, only available for X-431 V+ of Commercial Vehicle Version.
Note:
Please buy HD-III module instead of HD-II module, because HD-II module is already stop to produce.
There are main 3 differences between X431 V+ HD-III module & HD-II module
Different 1.
HD-III module: in Blue color
HD-II module: in Red color
- launch x431 HD III Scan Tool outlook
As the 3rd generation of heavy-duty module,Launch x431 HD iii scan tool works as a vehicle communication interface device, which is used to read the vehicle data and then send it to the X-431 V+ via wireless BT/WLAN communication. The LED indicators enable you to easily identify the working status of the module.
1 DC-IN power jack: For connecting the power adaptor.
2 Diagnostic socket: For connecting the diagnostic cable.
- LED indicators: It is defined as follows:
Vehicle: While communicating with the vehicle, the indicator lights up and flashes. Otherwise, it will not illuminate.
Power: It illuminates solid red when the module is powered on.
BT: Blue indicates the module is working in wireless BT mode.
I/O: It lights up when the module is connected to the diagnostic tool via data cable (Currently disabled and only reserved for subsequent function extension).
Wireless: It lights up when the module works as a wireless hotspot or network adaptor.
- Data I/O port: Currently disabled and only reserved for subsequent function extension.
- HD-II Module outlook
As the 2nd generation of heavy-duty module, it mainly functions as a VCI device for accessing vehicle data.
LED indicators: It is defined as follows(from left to right):
Power Indicator: It lights up when it is powered on.
Communication LED of Tablet: It illuminates when the module is communicating with the tablet.
Communication LED of Vehicle: It lights up once the module is connected to a vehicle’s DLC.
Communication LED of PC
Data I/O LED
- Data I/O port
- Communication Port of PC
- Diagnostic Socket: To connect the included diagnostic cable.
- DC-IN power jack: To connect the power adaptor.
Different 2.
HD-III module: send the vehicle data to the diagnostic tool via wireless Bluetooth or Wlan
HD-II module: send the vehicle data to the diagnostic tool via wireless Bluetooth.
WIFI module:
HLK-RM08K
Frequency range: 2412-2472MHz
Transmit power: 19.29dBm
Wireless BT module:
YG-218M-A2
Frequency range: 2402-2480MHz
Transmit power: 16.62dBm
X-431 V+ is compatible with the following two Heavy-duty VCI modules. For different VCI modules, the communication methods vary.
Below shows how the X-431 V+ system works.
- HD-III module:
Besides the BT communication, the LAUNCH X431 HD III VCI module comes loaded with a built-in WLAN module, which can work as a wireless hotspot or a network adaptor.
Below shows how the X-431 V+ system works.
- HD-II module:
The HD-II module send the vehicle data to the X-431 V+ diagnostic tool via wireless Bluetooth only.
Different 3
- Using HD-III module
*Notes:
a). For commercial vehicles, refer to the above connection method to proceed.
b). For passenger vehicles, replace the “Non-16pin connector” with “OBD I adaptor” +
“non-16pin connector (for passenger vehicles)”. Other connections shall also apply.
- Using HD-II module
For trucks equipped with non-OBD II 16 PIN diagnostic sockets, choose any one
of the following to proceed:
Read details:
- How to use X431 V+ with HD-III module and HD-II module
- X-431 HD III heavy truck module overseas online configuration Software List
- X-431 HD III heavy truck module overseas online configuration Packing List
launch x431 HD iii for sale:
http://www.obdiitool.co.uk/wholesale/launch-x431-hd-iii-truck-module.html
Source:http://blog.obdiitool.co.uk/launch-x431-v-hd-iii-module-with-x431-v/
obdiitool.co.uk Tech Support Blog 