Month: September 2020

Launch Thinkdiag vs. Thinkcar Pro vs. ThinkCar 2

obdiitoolcoukLeave a comment

 Launch Thinkdiag, Thinkcar Pro and ThinkCar 2 are OBDII all-system diagnostic tools with lots of service reset functions. They are all multi-language available and 1 year free update, the main difference is listed in the following comparison table.

ItemLaunch ThinkdiagThinkcar Pro=Thinkdiag MiniThinkCar 2 =Thinkdriver
Image
Item No. SC511SC411SC412
Main differenceEOBD2, DEMO and 1 Car Software All Free. If u need more ,pls buy software on the application.
Manufacturer Software Price for Each: $39.95/year
Reset Software Price for Each: $49.95/year		1. Car model diagnostic software: 19.95usd per one, lasts 1 year.
2. Service reset software: 19.95usd per one, lasts 1 year.
For the first-time customer, you will get one free 1 car model software, lasts 1 year.		1. Charge $14.95 for one VIN and two service reset (ABS + SRS)
2. Charge $9.95 for one service reset (only applicable to vehicles with vin bound to ThinkCar pro, and the period time is 1 year).
3. The first-time user will get one free VIN service + 2 kinds of service reset service.
OBDII all-system diagnosisOBDII all-system diagnosisYes. Engine, transmission, ABS, SRS, SAS, TPMS, EPB and chassis / body / electrical equipment system etc.Yes.Engine, transmission, ABS, SRS, SAS, TPMS, EPB and chassis / body / electrical equipment system etc.yes. Engine, transmission, ABS, SRS, SAS, TPMS, EPB and chassis / body / electrical equipment system etc.
Read fault codesOKOKOK
Clear fault codesOKOKOK
Live data streamOKOKOK
Actuation testsOK　NO　NO
Read version infoOKOKOK
Automatically read VINOKOKOK
FeaturesFormDongle + APPDongle + APPDongle + APP
Remote diagnosisOKOKOK
Online diagnostic reportOKOKOK
Community interactionOKOKOK
Wisdom online storeOKOKOK
Special FunctionsBattery matchingOKOKOK
DPF regenerationOKOKOK
Throttle adaptationOKOKOK
Headlights matchingOKOKOK
Injector codingOKOKOK
Sunroof initializationOKOKOK
Tire pressure resetOKOKOK
ABS bleedingOKOKOK
Gearbox matchingOKOKOK
Steering angle resetOKOKOK
Suspension matchingOKOKOK
Reset EGROKOKOK
Engine oil light resetOKOKOK
Break pad resetOKOKOK
Immobilizer matchingOKOKOK
LanguageEnglish, French, Spanish, German, Italian, Portuguese, Japanese, RussianChinese, English, French,German, Italian, Japanese, Portuguese, Russian, SpanishChinese, English, French,German, Italian, Japanese, Portuguese, Russian, Spanish
UpdateFree update online for 1 yearFree update online for 1 yearFree update online for 1 year
  1. How to charge Launch Thinkcar pro diagnosis/service reset service?

1). Car model diagnostic software: 19.95usd per one, lasts 1 year.

2). Service reset software: 19.95usd per one, lasts 1 year.

For the first-time customer, you will get one free 1 car model software, which lasts 1 year.

On sale: Buy one new machine and get 5 model software.

  1. How to charge Launch ThinkCar 2 diagnosis/service reset service?

1). Charge $14.95 for one VIN and two service reset (ABS + SRS)

2). Charge $9.95 for one service reset (only applicable to vehicles with vin bound to ThinkCar pro, and the period time is 1 year).

3). The first-time user will get one free VIN service + 2 kinds of service reset service.

Posted by https://thinkcar-thinkdiag.blogspot.com/

Fly SVCI 2018 “The device has been deactivated” solution

obdiitoolcoukLeave a comment

 obdii365.com chief engineer offer the solution to Fly SVCI 2018 error “The device has been deactivated” after the software is installed.

Fly SVCI 2018 "The device has been deactivated"

Step 1. Exit or uninstall all anti-virus application, then free download the following software to reset.

https://mega.nz/folder/RfYhBKCS#c0TifR9kvHk0Neg6LdIFkQ

Step 2. Open “Setting” file to replace the machine serial number and then save it.

Fly SVCI 2018 "The device has been deactivated" solution

Step 3. Run ” KeyRecovery_Online”, please follow the instruction to operate.

Good luck!

Fly SVCI 2018 tech support: http://blog.obdii365.com/

Autel MaxiIM IM608 key programming for BMW CAS4 CAS4+ by OBD

obdiitoolcoukLeave a comment

Autel MaxiIM IM608 is able to program the key for BMW CAS4 CAS4 + via OBD and does not need to dismantle the ECU box
Important tips: Network connection is required during operation.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD

BMW F30 key programming for example:

Notes: For CAS4, Add key all key lost procedure is the same, no need to get ISN; For Cas4+ all key lost, go to ISN code management to try to read Engine ISN code first, if it is not supported, you need to get ISN code through other way.

– The other steps are as the same as add key. To check the type of CAS system, go to “ECU information” to check.

Procedure:

Plug Autel IM608 into the OBD2 port of BMW, tap “BMW”.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD

Smart selection.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 3

Mini(Europe)->smart mode

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 3

Key learning -> OK (to confirm vehicle information) -> OBD learning -> OK (after reading a few instructions here)

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 5
Autel IM608 BMW CAS4 CAS4+ key programming via OBD 6
Autel IM608 BMW CAS4 CAS4+ key programming via OBD 7

OBD Read SK

Read notes.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 8
Autel IM608 BMW CAS4 CAS4+ key programming via OBD 9

Do you have a working key? Yes or No.l

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 9

Please put a working key to start coil as close as possible.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 10

It will read the password successfully.

Select a blank key position to write key.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 11

Please put new key close to start coil. Key frequency: 868MHZ.

Key learning has two steps…

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 12

Write key successfully.

Autel IM608 BMW CAS4 CAS4+ key programming via OBD 13

So follow the instructions on Autel IM608, the whole process will be done easily!

Source:http://blog.obdii365.com/2020/09/10/autel-im608-bmw-cas4-cas4-key-programming-via-obd/

Will Lonsdor K518S Program Mitsubishi Smart key when AKL

obdiitoolcoukLeave a comment

Lonsdor K518 is tested able to program Mitsubishi smart key when all keys lost, incl. Triton /2017-/, Xpander/2018-/, Pajero Sport /2017-, Mirage / 2014-.

MITSUBISHI\Generate LKE for all key lost:

Function

  1. Generate LKE for all key lost：generate a LKE which can turn on dashboard to add keys.

Operation

Generate LKE for all key lost

This function needs to dismantle car IMMO and PEPS, use programmer to read EEPROM chip data(24C16/24C01/25C320 chip supported currently), and copy and save it to customfile folder in K518 memory, then load the EEPROM data to generate key emulator(LKE, similar to working key).

When all keys are lost, this function can generate a spare master key, then you can use this key to turn on dashboard to add other keys.

Please place a key emulator(LKE) into K518 card slot.

Generating…

Completed. PIN code: 0A11. Please put a spare key close to ignition switch, turn on dashboard, and enter [add key] menu to program new keys.

Attention

This function needs to dismantle car IMMO and PEPS, use programmer to read EEPROM chip data(24C16/24C01/25C320 chip supported currently), and copy and save it to customfile folder in K518s key programmer memory, than load the EEPROM data to generate key emulator(similar to working key).

When EEPROM chip type are 24C16, 24C01 or 25C320, this function supports all key lost programming.

To be upgrading…

www.obdii365.com