CGDI DME-DDE CG-ECU simulator is a power cable, not only can do ECU test,also with ECU programming function.
It’s very easy-to-use:
OBD connection equipment Connect to 12V power supply The model port is connected to the corresponding ECU module Push the palm of the plug, pull it back and push it back
If this is your first time to buy Foxwell NT530 scanner, the article will be a good choice for you to read. NT530 scanner is the updated version of NT520 pro, and it comes with no software as default, so it needs you to download the specific vehicle software from official website. Here share you the related download and update guide.
Step 2: Unzip the file and start installing the “Foxassist”
Step 3: Register and Sign in
Step 4: Connect the NT530 device with computer via USB cable
Select “Update” shows on your tool and press “Enter”
Step 5: The serial number will appear in the input box automatically
Then click “Activation” to continue
Step 6: Click “Download” and press “Enter” on NT530 scanner again
Step 7: When an update message shows “This product is a single-vehicle software product, and there is no vehicle software yet. It is necessary to reconfigure a vehicle software”.
Select the vehicle software you need-> click “Submit”-> “Update”
Step 8: Update in process, please wait patiently…
Please kindly notice:
1.Don’t press any button before update completes
2.Don’t disturb the USB connection during the process of update
3.Press [Enter] to enter the main menu when update completed
Finish!
For your information, here is the related Foxwell NT530 software download and update video:
A customer got trouble in CGDI BMW key programmer update, here is the problem:
I downloaded the newest CGDI prog BMW V3.1.0 from the official website, and I already installed it for my device, but when I wanted to login, a message prompted “Software signature error, please update”. I tried to update, it showed “this is the newest version, needn’t to upgrade”.
Question: Is it possible to use KTM Flash ECU programmer to read VW Magotan data according to the chip model?
Answer: Yes. KTMflash ECU programmer with gearbox power upgrade tool can read chip data, read & write ECU data, read transmission data, etc at a high speed.
Question: How to reprogram?
Answer: It’s easy to use, just follow the following steps:
Step 1: Connect KTMFlash ECU programmer, gearbox power upgrade tool, VW Magvotan ECU and computer well
Step 2: Open software, select the corresponding ECU to enter reprogramming mode
Step 3: When read data successfully, just save it
Question: Besides TC1762/TC1766 MICRO (1504KB), which Infineon chip models can read the BOOT mode by KTMflash ECU Programmer?
Foxwell NT680 Pro is the newest full-system multi-brand diagnosis & service reset tool for both OBDI and OBDII vehicles till 2018 or 2019. It has more functions than NT680 scanner.
1.Foxwell NT680 and NT680Pro has the same diagnosis function:
– Can Find Troubles More Accurately.
– Shows live vehicle sensors data in text and graph formats
– Merges interactive live sensor graphs for easy and intuitive diagnosis
– Records and playbacks your data-logs to catch intermittent failures
– Identifies cars quickly and easily with one-key VIN reading
– Extremely easy to use with clearly arranged keypad, menu-driven operation and shortcuts
2.They also have the same full package:
In summary, Foxwell NT680 pro is more expensive than NT680 scanner, but it has more functions while NT680 cannot support: BRT, DPF, TPS/TBA, SAS, CVT, Gear Learning, TPMS, Odometer and Injector Coding.
How to update Foxwell NT680 pro OBD2 scanner?
Before updating your scanner, please make sure that you have created a Foxwell ID and you haveactivated your scanner.
l.Launch the update tool FoxAssist by double clicking the desk Icon and login with your Foxwell ID and password.
When you use FVDI 2015, FVDI 2018, FVDI 2 OBD terminator or TM100 Transponder key programmer, if a message appears “Device not opened” error, how to do?
Solution:
Don’t worry! It is easy to solve.
There are main causes for “Device not open” error:
1.USB driver problem
2.Connection problem
Please operate follow the steps below:
Step 1: Check the connection with device and computer
Step 2: Check the USB driver version whether is V2.10.0
Foxwell NT650 Elite is a cost- effective professional multi-application service tool. It’s the updated version of NT650 scanner, and adds a new function-Auto VIN function while NT650 cannot support.
Let’s start with the vehicle identification.
How to use the scanner to identify the specifications of the vehicle under test?
The vehicle identification information presented is provided by the ECM of the vehicle being tested. Therefore, certain attributes of the test vehicle must be entered into the scan tool to ensure the data displays correctly. The vehicle identification sequence is menu driven, you simply follow the screen prompts and make a series of choices. Each selection you make advances you to the next screen. Exact procedures may vary somewhat by vehicle. It typically identifies a vehicle by any of the following means:
-Automatic VIN reading
-Manual VIN entry
-Manual vehicle selection
Note: Not all identification options listed above are applicable to all vehicles. Available options may vary by vehicle manufacturer.
Automatic VIN reading
What’s Auto VIN?
Auto VIN is a shortcut for VIN reading menu which typically includes following options:
– Automatic VIN acquisition
-Manual input VIN
1). Automatic VIN acquisition
What’s Automatic VIN acquisition?
Automatic VIN acquisition allows s to identify a vehicle by automatically reading the vehicle identification number (VIN).
How to identify a vehicle automatic VIN reading?
Step 1: Scroll with the arrow keys to highlight Auto VIN from the main menu
Press the ENTER key
Step 2: Select Automatic VIN Acquisition from the menu
Press the ENTER key
Step 3: The Foxwell NT650 Elite scanner starts to communicate with the vehicle and read the Vehicle Specification or VIN Code automatically.
Step 4: Answer YES if the Vehicle Specification or VIN code is correct and a menu of controller selection displays.
Answer NO if it is incorrect, and you are required to enter the correct VIN number manually.
Step 5: If it takes too long to get the VIN code, press Cancel to stop and input the VIN manually. Or if failed to identify the VIN, please input the VIN manually or click Cancel to quit.
2).Manual VIN Entry
What’s Manual VIN Entry?
Manual VIN Entry identifies a vehicle by manually inputting a 17-digit VIN code.
How to identify a vehicle by manual VIN entry?
Step 1: Scroll with the arrow keys to highlight Auto VIN from the main menu
Press the ENTER key
Step 2: Select Manually input VIN from the menu
Press the ENTER key
Step 3: Press the function key Keyboard and a virtual keyboard opens for VIN entry
Step 4: Input a valid VIN code and use the function key Completed to confirm
The scan tool starts to identify the vehicle.
2.Manual Vehicle Selection
When you select vehicle brand you want to test, there are two ways you can get to diagnose the car:
Method 1: Smart VIN
Method 2: Manual Selection
Method 1: Smart VIN
Smart VIN allows you to identify a vehicle by automatically reading the vehicle identification number (VIN).
How to identify a vehicle by Smart VIN?
Step 1: Scroll with the arrow keys to highlight ABS& Airbag from main menu
Press the ENTER key to start
Note: If you have the application assigned to one of the function keys at the bottom of the screen, you can alternatively press the function key to start the application
Step 2: A screen with vehicle manufacturer areas displays
Select the area where the car brand is originated
A list of vehicle makes display
Step 3: Select the vehicle manufacturer
A list of vehicle identification options displays
Step 4: Select SmartVIN from the menu
Press the ENTER key
Step 5: The NT650 Elite tool starts to communicate with the vehicle and read the Vehicle Specification or VIN Code automatically.
Step 6: Answer YES if the Vehicle Specification or VIN code is correct and a menu of controller selection displays.
Answer NO if it’s false, and you are required to enter the correct VIN number manually.
Method 2: Manual Selection
Manual Selection identifies a vehicle by making several selections according to certain VIN characters, such as model year, and engine type.
How to identify a vehicle by manual vehicle selection?
1.The step 1 to step 3 is same as Method 1- Smart VIN
2.Select car year-> body-> main groups according to your need
Then press the ENTER key
Do this until the complete vehicle info is entered and the menu of controller selection displays
obdiitool.co.uk Tech Support Blog 