V159 JLR Mangoose SDD Pro is a newest cost-effective adapter for Jaguar and Land Rover from 2005 to 2017. Here mainly talks about the related user manual for users.
V159 JLR Mangoose SDD Pro Software:
Software Version: V159
Supported Vehicle: Support 2005 to 2017
Operating System: Win XP, Win 7 32bit
Software interface display:
What canV159 JLR Mangoose SDD Pro do?
-Original JLR function 1: 1
-Supports the old model PWM protocol, CAN protocol, and supports K-line and L-line.
-Supports programming power.
-All products are checked out of the warehouse to ensure the consistency of the products before leaving the factory.
I bought this Foxwell NT530 scanner recently. I have made many attempts to download the software, and they don’t work.
The download starts, then gets stuck at trying to download and unzip the “Home” file.
I have been in contact by email with Foxwell and they suggested unplugging it and then plugging in again and try again. Follow their suggestion, I have tried this and every combination I can think of, but it will not download the VW or Home files.
It has downloaded the OBDII/EOBD file only. So without the software it does no more that a low cost scanner and doesn’t do what it is supposed to do.
AUTEL MaxiDiag MD808 Pro is a professional cost-effective OBD2 full system car diagnostic tool. Here have collected some common questions & solutions and unbiased customer reviews. Hope it’s helpful!
AUTEL MD808 Pro FAQs:
A1: Can MD808 pro enter code for battery on Audi s4 2012?
Q1: Yes, it can.
Q2: Does it read TCC transmission data on GM vehicles?
A2: Yes, it does, can read slip count, shift time, temp, and tons of other things
Q3: Does md808 pro include ALL SYSTEM as in MD802 All systems, or only 4 systems?
A3: It is a combo of the Maxicheck Pro and the MD802 (I don’t know how many systems the listing doesn’t say), the regular MD808 is 4 systems.
Q4: What is a component test?
A4: it initiates a leak test for the EVAP system
AUTEL MAXIDIAG MD808 Pro Customer Reviews:
Review 1: Successfully updated firmware using Apple Mac
I was able to update the memory card via Apple Mac using a card reader and their Mac update software. Not the easiest or straight forward process, but it can be done.
Review 2: Good scanner
Purchased this to help diagnose an ABS issue and to clear the trouble code(s). It handled these tasks without issue. The extra 5 feet male to female cable along with the MD808Pro is a plus. It makes me work outside my vehicle.
The ability to see sensors operate in real time and plot them on a graph is invaluable. Before using this tool, updates are a must. You need to create an Autel account so you can update your unit. Once you have an account you can download the “Maxi PC Suite”. This allows you to update your software and Print content off the device.
I’m amazed how well this unit works on my 09 Mercedes Cla 250. A lot of modules displayed after scan all. Love it.
Review 3: Good tool
So far it helped me diagnose a SRS and ABS fault. Happy with this purchase.
Immediately after purchasing the MaxDiag 808 Pro, I created a user account on the Autel website and downloaded the PC software app required for updating the unit. Autel can only support Windows which would remind you the software of Autel is not trustful, but that is fine because most Windows software works like that. Then the MD808 Pro software update completed without any more hitches.
Review 4: Works as expected
This is a very capable scanner for the money. It is easy to use and has a very nice color screen. Used it to diagnose and fix problems on Mercedes, BMW, VW and so on. it detects VIN automatically, and easy to reset engine warning lights. aslo do some basic TPMS on some Japanese cars like Honda, but no TPMS work for Germany car. It’s a downgraded MX808. Considering the price and free update lifetime, great deal!!
Review 5: A must have for DIYer like me
Very handy tool. I purchased this to help diagnose an ABS issue and to clear the trouble code(s) when the issue was fixed. The MD808 Protool handled these tasks without issue. The ability to see sensors operate in real time and plot them on a graph is invaluable.
V4.8.9 VVDI prog can support the following functions:
-Support R&W lots of chips, include MC9S08 series, MC68HC (9)12 series, MC9S12 series, V850 series, H8Xseries, R8Cseries, PCF79XXseries and most EEPROM chips, etc.
–Support chip data verify, check blank function
-Support data file compare function
-Support R&W BMW N20, N55 ECU (show ISN directly)
-Support R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J, etc.)
-Support renewing PCF79XX remote, currently support BMW E/F series
– Lots of connection diagram
2.Software interface
1).Operation options
File: Load data file
Buffer: Support copy, paste, search and fill function
Device: Support chip read, write and erase operation
Window: Compare two data files
Setting: read& verify, write& verify and erase& check blank configuration
Language: Change the language, current support English, Chinese, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish
2).General options
Provide General function buttons, simple and easy for operation, include: new, open, save, read, write, verify, check blank, erase, calculator & upgrade
3).Read range
Parts of chips include several data areas, for example EEPROM, FLASH and etc. click on the button select read range
4).Data display
Display the read data or load data, include hex and ASCII format
5).Power configuration
Display the status of power (VCC, VPP, 12V), support change the voltage of VCC and VPP (The default voltage usually not need to change)
6). Special function options
Provide chips special function, for example parts of chips have read chip ID, set security, reset security etc.
7).Chip option
Select right option according to type, brand and chip
8).Option Information
Display parameter information of current option
9).Connection diagram button
Click on button, and get the connection diagram of current chip
10).Adapter Type
Display needed adapter of current option
11). Operation Information
Display operation information and saved in “log.bin” file
3.Driver installing
The driver installing software saved in “driver” folder, include 2009 and 2016 version (recommend select 2009 version)
4.Online update
Important: This function require internet support
Step 1: Click the “Upgrade” button enter the upgrade interface, show as following picture
Step 2: Enter update interface
If software show “communication with server failed”, please close your Anti-virus and computer firewall and retry.
If software show “unable to find equipment”, please reconnect device
Note:
1)Tip information
-shows the latest software version and upgrade information
2)Device information
– shows the device SN, device firmware version and the latest firmware version
3)Firmware upgrade steps:
Step 1: Select the firmware version
Step 2: Click “Start Firmware Upgrade” button
Step 3: Don’t close or pull out USB cable before upgrade finished
4)Software upgrade steps:
Step 1: Click “Software Link 1” or “Software Link 2” button, download software from the web
Obdiitool.co.uk has released the Bluetooth version 2014D VIDA DICE diagnostic tool for Volvo vehicle from 1998-2014. This article will highlight the tips and guide to install the related software version on Windows 7.
2014D VIDA DICE Bluetooth software introduction:
– Software version: Latest V2014D
– Vehicle coverage: For Volvo vehicle from 1998-2014.
– Communication: Support USB connection. Add Bluetooth communication function.
Install it to the list, till all installations finished
Then restart the computer
2. After restarting, once the service icon (bottom right) is available (VIDA status: running), then select the following cracked execution document [VIDA2014D_patch.EXE], install it to the list, and restart the computer
User Name: 1
Enter VEHICLE PROFILE
Communication Tool, Installing Device Driver Software
As we know, XPROG-M V5.84 with USB Dongle is available with reading EEPROM. Here have collected the latest and most complete chips list supported by this XPROG ECU programmer.
Obdiitool.co.uk has released the newest iProg ECU programmer-V80. It’s available with English & Russian. Free download iprog+ Pro V80 and install on Win7, Win8, Win XP or Vista.
X-PROG box ECU programmer has been updated to newest version 6.12. It comes with USB dongle, no need activation. With new generation hardware, runs more steady and faster than old version. Here share the tips and guide to use and install XPROG V6.12.
XPROG V6.12 Display
Part 1: How to use XPROG V6.12
XPROG V6.12 ECU Programmer added new authorization: AUTH-0028-3 Renesas RL78 and AUTH-0028-4 Renesas M32C. It only supports English, can be used on Win XP/ Win7 and Win8.
Tips to use XPROG V6.12:
1.XPROG-M V6.12 dongle isn’t compatible with older version Xprog.
2.Please close all anti-virus software in your computer, because the anti-virus software will kill Xprog-M V6.12 driver.
3.Disconnect internet. If not, the internet may damage XPROG hardware.
4.Uninstall all the old version XPROG software before you install V6.12 software, because XPROG-M V6.12 hardware is not compatible with other versions of XPROG software.
5. Never try to UPDATE it, otherwise the hardware will be damaged if you try to update it online.
Part 2: How to install XPROG V6.12
Before installing, please make sure the operation system meets the the following needs.
1.Windows system should be windows XP 32bit or windows 7 64 bit, all the patch software for the windows system should be installed already and the windows properly works well.
2.The windows system should be with at least 2 partitions (except the CD ROM.)
3.Can not be working with virtual hard disk.
4 steps to install XPROG V6.12 software:
Click the file “installation.reg”, get the file information to the regedit. The file “AdbeRdr11000_zh_CN.exe” must be installed, otherwise the Xprog software will fail to start. 3.Plug the Xprog main interface to the computer and install the USB driver. 4.Copy the folder “XPROG-BOX6.12” to the desktop, and open it, and run the “xprogdesktop.exe”, then open the software.
This is technical support from OBDiitool.co.uk for “VCM II – IDS software version mismatch”, when you are in trouble such as this, you should upgrade your VCM II
Here are the steps of how to update VCM II firmware:
1.Take off the bottom shell of Ford vcm ii as following picture show
Step 2：Connect the USB cable to Ford VCM 2, and Press and hold the button as picture 2 marked
Step 3. Hold the Press button till you connect the USB cable to the laptop and hear the beep sounds.
Open Ford VCM II Manager, then go to VCM II Update for recovery
Kukai New! alpha All-in-one car key cutting machine has been rolled out in OBDiitool.co.uk, alpha is a lastest key cutting machine which with First 4-way jaw for standard keys, laser keys & dimple keys in the national market.
Kukai alpha supports to duplicate keys without key data in database.Including single standard keys, double standard keys, single external groove keys,double external groove keys,internal groove keys & tubular keys
Here we make some youtube video of how to use Kukai Alpha to make a new key :
Kukai Alpha Duplicate new HU162T Key For Volkswagen
How to cut Volkswagen HU162T keys with Kukai Alpha Key Cutting Machine
How to Duplicate Double standard key with Kukai Alpha For Toyota camry key
How to cut Toyota Camry keys with Kukai Alpha
How to Duplicate Double External Groove Key with Kukai Alpha for Honda accord key
How to cut a new key for Honda Accord with Kukai Alpha
How to cut tubular keys with Kukai Alpha
How to cut single standard schlage key Kukai Alpha
How to calibrate S1 Jaw 4 way Jawon On Alpha Key Cutting Locksmith Tool
How to calibrate S2 Jaw Single standard key
How to calibrate S3 jaw Tubular Key Jaw
How to calibrate S4 jaw Tibbe key
Advantage of Alpha automatic key cutting machine
New jaw and cutting system, better compatible with folding keys and smart card small keys, more convenient and versatile;
Latest original jaw design, to support to directly cut Volkswagen Audi HU162T key and Toyota& Lexus TOY2 key, no need small jaws;
The first automatic key cutting machine that support to check missing teeth of ignition lock for HU162T through teeth numbers of door lock, and vice versa, greatly improving the work efficiency for locksmith;
Some optional jaws for your choice, including house key jaw, FO21 key jaw, tubular key jaw and engraving jaw;
Graphic display of each key.
Feature of Alpha automatic key cutting machine
Support to cut automobile,Chinese car,residential,dimple & tubular keys etc.
Adopted high-precision ballscrew for X, Y & Z axis,bringing higher repetitive positioning accuracy.
Adopted DC brushless motor for Z axis to control cutter directly,bring higher cutting precision and lower noise.
Portable for mobile , easy to work outside
Equipped with tool box to place decoder, cutter, calibration block etc.
obdiitool.co.uk Tech Support Blog 